(word processor parameters LM=8, RM=75, TM=2, BM=2) Taken from KeelyNet BBS (214) 324-3501 Sponsored by Vangard Sciences PO BOX 1031 Mesquite, TX 75150 There are ABSOLUTELY NO RESTRICTIONS on duplicating, publishing or distributing the files on KeelyNet except where noted! September 9, 1993 FLAN2.ASC ---------------------------------------------------------------------------- This file shared with KeelyNet courtesy of William Bethel & Jim Shaffer. ---------------------------------------------------------------------------- The following is a compilation of comments from the CompuServe (CIS) New Age Forum - Moderated by Alain Beaulieu and sent to KeelyNet by William Bethel. The file has been edited to eliminate redundancy. ---------------------------------------------------------------------------- Fm: Alain Beaulieu/SL9 70403,3645 - To: Dean Miller 75110,3417 Date: 09-Aug-93 02:13 EDT From: Patrick Flanagan 71650,60 Subj: Neurophone & uclusters Dear Alain: I have no desire to keep these communications private. If I ever want to send something to you privately I will indicate it in the beginning of my text. I like to write these letters in Word for Windows so I can run the spelling checker. When I am finished I save the file to the CSERVE directory as a Text file with Layout. Then in WINCIM (now) I select send file from the mail menu. When I write an article I will upload it as a file in the forum. Your questions and my desire to answer them has led me to open up areas my mind that I had shut off for many years. I have no problem with writing in ASCII format and placing my drawings as GIF files. I will work along those lines. Thank you for sending me the papers. I am digging out the Minto Papers for you. The reason Coanda kept his formulas secret was so that he could profit from his years of hard work. He had a number of companies and institutions that tried to use his discoveries without giving him credit or remuneration. He earned his living from his inventions in much the same way that I earn my living. I have talked to David Cole about my scalar wave receivers and we will be testing them out on some dolphins. I will keep you informed about what we find. The Minto apparatus was used to locate schools of fish because the antenna can be made very directional. Two ships can therefore locate schools of fish by triangulating scalar wave emissions from the fish. We have not idea why fish emit scalar signals. Every type of fish tested had a particular "signature". The scalar signals were all emitted in the acoustic frequency range. It may be that fish use these signals as a form of navigational signal in much the same way dolphins use acoustic search signals. I met Dr. Motoyama in Tokyo in 1974. He was using a circuit that was similar to my first Neurophone to measure the energy of chakras. The device consisted of an apparatus in which a person stands. A capacitor electrode arrangement moved up and down the body. The capacitor electrodes were measuring the Page 1 change in dielectric activity in the body at various locations. The chakras produce a dynamic change in the dielectric constant of the air in the area around the body. By measuring these changes, you can detect the vibration and energy levels. By attaching appropriate electronics to the Neurophone, we could also measure the dynamics of the chakras. The Neurophone circuit can be used as a scalar transmitter or receiver. Capacitors and the action of energy storage in dielectrics is not understood by people who work with capacitors every day in electronic circuit design. The phenomenon of energy storage in a capacitor is due to scalar polarization. The same thing is true of energy storage in "space" by magnetic fields. By understanding the true nature of "capacitors" we can unlock the key to using scalar phenomena. In 1974, I also visited Shinichi Seike who was working on "tachyon" transformers and other devices. The term "tachyon" is simply another buzz word for scalar. Seike's circuits and coil designs were all self canceling configurations that neutralized electric and/or magnetic fields leaving the scalar vector potential. The entire so-called tachyon devices that are now being sold are simply items that have been charged with pyramids and/or crude scalar devices. That's all for now. Kindest regards, Patrick Flanagan ---------------------------------------------------------------------------- Looking forward to more messages. I'll relay your message to Dr. Flanagan just in case he has not seen it in the forum. (He's still new at Compuserve!) How do you like it so far? Alain ---------------------------------------------------------------------------- 10-Aug-93 - Fm: Dean Miller 75110,3417 - To: Alain Beaulieu/SL9 70403,3645 Alain, Verrry interesting. Really. It's been a very long time since I worked with analog electronics, so I'm mighty rusty on self-cancelling coil design and such. I also had no idea that there was so much work going on in the field of electrical signals generated by living bodies (and fish sounds). I would like to see a book or something that details some of the experiments conducted and lines of future research. I certainly don't know much of anything about chakras (except for some mystical stuff). As you can see, I'm pretty much a neophyte where all this is concerned. But, boy, am I interested. Dean ---------------------------------------------------------------------------- 09-Aug-93 - To: Patrick Flanagan [71650,60] Subj: Neurophone & uclusters Dear Dr. Flanagan, In case you have not seen the message on the New Age Forum, here one question for you from one who would like to join the discussion. (Dean Miller 75110,3417): Is there any chance of sharing some of the details about your scalar acoustics? (At least, that's what I think I read.) >> Your questions and my desire to answer them has led me to open up areas my mind that I had shut off for many years.<< We certainly welcome your participation on this forum. You just can't imagine how "thirsty" we are of learning from your lifelong experiichrowski is quite familiar with those). >> By attaching appropriate electronics to the Neurophone, we could also measure the dynamics of the chakras << That gets complicated! What sort of changes were you detecting? >> Neurophone circuit can be used as a scalar transmitter or receiver. Energy storage in capacitor is due to scalar polarization. Same thing for energy storage in "space" by magnetic fields. Understanding the true nature of "capacitors" can unlock the key to using scalar phenomena. << YES! I CERTAINLY want to know about that. Please tell us more! >> Shinichi Seike << Have you got his last edition of "Principles of Ultra-Relativity". I think it was published around 1990. (I have the edition prior to that one). >> "tachyon" is simply another buzz word for scalar. Seike's circuits and coil designs were all self canceling configurations << It was clear that they were cancelling but I had not figured out that his "tachyon" buzzword was used to denote scalar properties. >> so-called tachyon devices now being sold are simply items that have been charged with pyramids and/or crude scalar devices.<< I guess you don't get as much charge than if you get the real scalar field. I remember reading that you had published and possibly done some research on the pyramids. Can you tell us some info on that? (Personally, my first interest is toward the scalar stuff but there are people who are also interested in the other fields of "weird science"). Regards, Alain ---------------------------------------------------------------------------- 11-Aug-93 - To: Alain Bealieu - Fm: Patrick Flanagan 71650,60 Dear Alain: 1. The original Neurophone was a self-resonant system. As the dielectric constant of the body/skin changes, the frequency shifts. This frequency shift can be detected and converted into a variable voltage that can be logged on a chart recorder. The frequency shift can be used as information. This is the principle of the Motoyama chakra detector. One of the things that has been reported from Russian research is that scalar fields alter the characteristics of insulators. These characteristics include: change in dielectric constant and conductivity of the insulator. Page 3 2. Many years ago, I showed Dr. Walter Stark of Lugano, Switzerland a phenomena I had discovered. If you make a coil of twin lead like speaker wire, you have two wires side by side. The only connecting link is the insulation between the wires. If you connect a battery in series with one wire and ground and then connect the other wire to an electrometer, the coil acts as a capacitor. The electrometer will measure the "leakage" current through the insulator. The current will probably be in nanoamps. If you then bring the coil in the vicinity of the body, the current will increase by several orders of magnitude. This is due to the scalar field around the body. If the coil is placed over the various chakras and the output of the electrometer is connected to a chart recorder you will even be able to record the pulsation of each chakra. Dr. Stark used my idea in the creation of an instrument that became known as an aura meter in Europe. It is also known as an orgone meter. By using such a meter, newage scientists can learn a lot about scalar fields. In giving these "secrets" away, it is my intention to stimulate research. It is not my intention to hand all my secrets over on a silver platter. A good teacher will stimulate thinking processes. I have built all kinds of these "aura" or "orgone" meters. You can experiment with different capacitor configurations and dielectrics. The obvious question is --- if you can detect scalar fields with insulators, can you generate these fields with insulators? The answer is a resounding yes! This goes back to my earlier statement that capacitors can be used to generate scalar fields, traveling scalar standing waves etc. This research has been used to create many kinds of transmitter and receivers. The question of scalar acoustics really invloves the Neurophone. More Later - Patrick Flanagan ---------------------------------------------------------------------------- 11-Aug-93 - Fm: Alain Beaulieu/SL9 70403,3645 - To: Patrick Flanagan 71650,60 Dear Patrick, You finally landed in the Forum! Great! We should soon start to see more participants into the discussion. >> frequency shift as principle behind Motoyama chakra detector << Thanks for the insight into Motoyama's principle. However, on first reading, it sounds close to Dr. Hunt's work where she used frequency spectrum to detect patterns. In what way was Motoyama's works very different from Hunt's work? >> Russian research in scalar fields on insulators << Could you provide me with a reference paper or at least a scientist name to look for in order to find more information? >> coil of twin lead like speaker wire, << Great! The first thing that comes to mind is that the capacitive value of the body may have been a factor here. However, the pulsation pattern would provide a way to identify other causes. I can just see how scientists not conversant with chakras and other mystical phenomena might overlook these pulsations. Was there ever something published on this? >> not my intention to hand all my secrets over on a silver platter. << Hehehe! As someone said, the information sinks in much better when the student has tried to solve the problem but hit a wall! He will then be very receptive to a demonstration of the solution. >> can you generate these fields with insulators? The answer is a Page 4 >> resounding yes! << That is why you say that Townsend Brown's capacitor were generating scalar fields in order to produce their thrust under high voltage. An easy hypothesis from this would be that scalar fields would be the key to finding antigravity thrust properties. Have you done research in this area? >> capacitors can be used to generate scalar fields, traveling scalar >> standing waves etc. << I have always been under the impression that standing waves do not "travel". What do you mean by "travelling scalar standing waves" and how would you produce them? >> research has been used to create many kinds of transmitter and >> receivers. << I remember reading in a patent by Gelinas that scalar fields have a different speed than that of light and can go through media that EM fields can't go through. Have you done measurements of propagation speed of scalar fields? >> More Later. << Really looking forward to this! Alain (By the way, I will use this opportunity to officially welcome you to the New Age Forum. Also, if you browse around other sections, you are likely to find other interesting discussions. Feel free to join in the discussions at any time.) ---------------------------------------------------------------------------- 12-Aug-93 - Fm: Jonathan Eagle 72257,2270 - To: Patrick Flanagan 71650,60 Patrick, I very happy to see that you will be participating in the New Age forum and sharing some of your hard-earned experience. I think a great deal of benefit for all can come of this. I would like very much to build a relatively simple device that can demonstrate and/or measure scalar energy. It sounds as if the device you described consisting of the battery, the coil of zip cord (speaker wire) and the electrometer is just such a device. However, I am having a little trouble understanding what is connected to what. At first I thought you were saying that on one end of the coiled zip cord the positive battery terminal is attached to say the ribbed conductor and the negative terminal is attached to the other conductor while a high impedance voltmeter is connected across the conductors on the other end of the zip cord. But I think that that would only measure battery voltage and not insulator leakage current. So now I am wondering if you meant to have one conductor of the coiled zip cord connected to the positive end of the battery, the other conductor at the same end of the zip cord connected to the positive lead of the voltmeter, and the remaining negative battery terminal connected to the negative lead of the voltmeter leaving the other end of the zip cord unconnected. Is this what you were conveying or am I missing the boat altogether? I guess while you are answering questions, here are some others that occur to me: is a one layer coil sufficient to make a sensitive enough detector for chakra mapping (or whatever) or should the coil be multilayered? Also, can the leads be allowed to twist in the coil or should one be careful to keep the conductors always alternating? Jonathan Page 5 ---------------------------------------------------------------------------- 13-Aug-93 - Fm: Patrick Flanagan 71650,60 - To: Alain Beaulieu 70403,3645 Dear Alain, 1. >> frequency shift as principle behind Motoyama chakra detector << The Motoyama detector measures changes in dielectric field resonance in the space around the body. Dr. Hunt uses direct contact EMG electrodes as far as I know. The Motoyama signal is due to a change in the spatial dielectric constant around the body as a result of the scalar potential variation. 2. >> Russian research in scalar fields on insulators << Handbook of PSI Discoveries pg 329 Sheila Ostrander <> Lynn Schroeder A New Type of Detector to Register Physiological Functions G.A. Sergeyev <> G.D. Shushkev <> E.G. Gryaznukin The Sergeyev Detector "The electrical-field activity of excited cells in the human organism can be regarded as turbulent low-temperature plasma that affects the dielectric properties of the environment. Experimental investigations of low-temperature plasma structures of biological origin, together with computations performed by computer, brought us (Sergeyev, 1968) to the conclusion that the energetic processes in living organisms are subject to the formal requirements demanded by the thermodynamic systems with negative temperatures. The Maser effects of the living organism result in the emission of highly concentrated streams of free electrons and protons into free space, which may change the local properties of the dielectric properties of the air. The above theoretical prerequisites laid the foundation for the proposed new type of detector. The principles of operation are based on the fixed voltage between two capacitive plates, separated by a dielectric with non-linear properties. Polarized barium titanate crystal (BaTiO3) was used as a dielectric. The voltage of the output of a barium titanate element is of course determined by the formula: 4 II d E / E(p) * D1/1 (Acoustic Pressure) E = 10^12 dynes/cm^2 d = 1.75 * 10^-6 (Young's Module) E(p) = dielectric constant depending on P - the degree of turbulence of the plasma field of biological origin. The Sergyev Detector used barium titanate but any insulator will do and it does not have to be piezo-electric! >> coil of twin lead like speaker wire, << Nothing was ever published on this. It was entirely my own research. The first "publication" is here in the Forum. 3. >> can you generate these fields with insulators? The answer is a >> resounding yes! << I have succeeded in generating Gravitational Thrust much higher than that obtained by Townsend Brown. Page 6 4. >> capacitors can be used to generate scalar fields, traveling scalar >> standing waves etc. << A "traveling" standing wave is generated by causing a slight phase difference between two phase canceled carriers. By varying the phase, the standing wave scalar field can be caused to "walk" or move... at least it looks like it is in motion. 5. >> research has been used to create many kinds of transmitter and receivers. << Alain : I remember reading in a patent by Gelinas that scalar fields have a different speed than that of light and can go through media that EM fields can't go through. Have you done measurements of propagation speed of scalar fields? Patrick: This is true the ability of scalar fields to travel through water and earth enables these signals to be transmitted over great distances where EM fields would be lost. They do travel faster than Maxwellian fields because they are not Maxwellian and obey different laws. I am really surprised that EM signals are being used for submarine communications because scalar waves will do the job in two way communications for a fraction of the cost. I think that UFO's or ET's communicate with scalar signals and all the work being done with radio telescopes will never get any results. Scalar signals may be used to modulate interdimensional or inter-galactic waves being generated by stellar phenomena. Radio communications is outmoded by advanced technology. In my next communique I will give you some of the Minto details. Kindest regards, - Patrick ---------------------------------------------------------------------------- 13-Aug-93 - Fm: Patrick Flanagan 71650,60 - To: Jonathan Eagle 72257,2270 (X) Dear Jonathan, The Scalar Detector coil is a two wire coil such that the two wires are not in electrical contact with each other. The wires act as a capacitor, being two parallel coils side by side with capacitive coupling through the insulation. The positive terminal of the battery is attached to one of the coils and the nagative of the battery is attacthed to the electrometer ground. The second wire coil (of the zip wire) goes to the input of the electrometer. The electrometer is measuring the leakage current through the wire insulation. All so called insulators are simply poor conductors, but they are conductors measuring in hundreds of millions of ohms. Scalar fields alter the conduction characteristicas of insulators. The electrometereads the change in current. The description I gave you is a starting point. I have made detectors that are much better. You can wind parallel coils out of thing enameled wire and you will get better results. I used #28 wire for mine and my coil measures two inches in diameter and ten inches long. I was able to map chakras with that coil. Kindest regards, - Patrick ---------------------------------------------------------------------------- 13-Aug-93 - Fm: Alain Beaulieu/SL9 70403,3645 - To: Patrick Flanagan 71650,60 >> Dr. Hunt uses direct contact EMG electrodes as far as I know. << Correct. I could not see anything to the contrary. Maybe I am starting to confuse her work with someone else who had observed holographic field properties from anywhere on the body. Page 7 >> thermodynamic systems with negative temperatures. << Negative temperature? I guess you are talking about the tendency to go toward order rather than disorder, and by extrapolation from entropic rules, you would need a negative temperature to go toward greater order. Is that what you mean? >> low-temperature plasma structures of biological origin, << Hmmm! Bearden was saying that ionized gases such as a flame, etc, are affected by scalar fields. I guess that would explain why the human body is so much ruled by scalar fields (as you stated it is). >> The Maser effects of the living organism result in the emission of highly concentrated streams of free electrons and protons into free space, << Why Maser as an example? Are those free electrons and protons emitted in the microwave frequency range? >> 4 II d E / E(p) * D1/1 (Acoustic Pressure) << Which acoustic pressure is that? What does D1 stand for and why is it over "1"? >> The first "publication" is here in the Forum. << Thank you very much for this Great Premiere! >> generating Gravitational Thrust much higher than that obtained by >> Townsend Brown. << Wow! Was it with barium titanate too? What exactly decreased the efficiency of Brown's setups? >> "traveling" standing wave << So these waves would be less efficient than full standing waves? Why would you want them to move rather than stay stationary? >> They do travel faster than Maxwellian fields because they are not >> Maxwellian and obey different laws. << GREAT NEWS! How much faster? Is this so clear cut that it could put Einstein's theories (including the limit of the speed of light) into questions, and thereto revolutionize quantum physics? >> all the work being done with radio telescopes will never get any >> results << I fully agree with you! The SETI program to send messages in EM hoping to get a message back is not the way to get results. We could use the money to better use. Regards, Alain ---------------------------------------------------------------------------- Date: 09-Aug-93 21:14 LCL MgTo: Patrick Flanagan [71650,60] Subj: Neurophone & uclusters (Outbox) Dear Dr. Flanagan, In case you have not seen the message on the New Age Forum, here one question for you from one who would like to join the discussion. (Dean Miller 75110,3417): Is there any chance of sharing some of the details about your scalar acoustics? (At least, that's what I think I read.) >> Your questions and my desire to answer them has led me to open up areas my mind that I had shut off for many years.<< Page 8 We certainly welcome your participation on this forum. You just can't imagine how "thirsty" we are of learning from your lifelong experience in "vangard" researchs. >> I am digging out the Minto Papers for you.<< Thank you very much for your effort. I am really looking forward to learn more about the scalar electromagnetic effects. >> David Cole (about my scalar wave receivers) will be testing them out on some dolphins.<< I am so pleased to learn that you are getting all the cooperation that you need! >> Dr. Motoyama was using a circuit similar to my first Neurophone to measure the energy of chakras. The capacitor electrodes were measuring the change in dielectric activity in the body at various locations.<< That sounds like what someone else was doing to detect frequencies to which people were "allergic" to. In Europe, people were found to be affected by the 50 Hz of power lines, while in North America, people were affected by 60 HZ but not by 50 Hz. Have you heard of those? (I believe that Dr. Michrowski is quite familiar with those). >> By attaching appropriate electronics to the Neurophone, we could also measure the dynamics of the chakras << That gets complicated! What sort of changes were you detecting? >> Neurophone circuit can be used as a scalar transmitter or receiver. Energy storage in capacitor is due to scalar polarization. Same thing for energy storage in "space" by magnetic fields. Understanding the true nature of "capacitors" can unlock the key to using scalar phenomena.<< YES! I CERTAINLY want to know about that. Please tell us more! >> Shinichi Seike << Have you got his last edition of "Principles of Ultra-Relativity". I think it was published around 1990. (I have the edition prior to that one). >> "tachyon" is simply another buzzword for scalar. Seike's circuits and coil designs were all self canceling configurations<< It was clear that they were cancelling but I had not figured out that his "tachyon" buzzword was used to denote scalar properties. >> so-called tachyon devices now being sold are simply items that have been charged with pyramids and/or crude scalar devices.<< I guess you don't get as much charge than if you get the real scalar field. I remember reading that you had published and possibly done some research on the pyramids. Can you tell us some info on that? Regards, Alain ---------------------------------------------------------------------------- Flanagan - 1993-August-17 22:43 - TO: Alain Beaulieu - FM: Patrick Flanagan Dear Alain: I received your package and would like to thank you for sending it. I have not completed it yet. I will comment on it after I have digested it. 1. It reminds me of some work that was done at Aberdeen Proving Grounds. I spent some time there in the 1960's. They developed a device that they called the "Anal Sphincter Resonator". It seems that they had discovered the mechanical resonance of the average anal sphincter. There was an off- Page 9 Broadway play in New York. It was a suspense thriller. The special effects man wanted to play very low musical note when danger was being acted out. This note was to "shake up" the audience and lend some subliminal effect. The engineer made a large organ pipe out of sewer pipe. He connected a fan to the pipe to provide air flow. On opening night, they had a full house. When the organ was switched on, the entire audience dumped in their pants. The show closed on opening night. The revue said that it was a crappy play. Aberdeen heard about the effect and developed a "sound cannon" that resonated at about 13 Hertz. They tried it and it worked. They were going to use it for riot crowd control if it was ever needed. They certainly could have used it in Los Angeles. No one wants to march when their pants are dirty. The only problem with the machine was that the operator had to were diapers. The "phased" arrays in the ADEPT seems like it would lend itself to producing focused sound waves in any frequency range. Maybe one could be built that was directional. 2. I have been going through the Wallace Minto papers and they do not really tell how to generate and receive hydronic waves. They do tell about experiments that prove that they are not EM waves. I am copying them for you and should get them off to you in a day or so. 3. In the mean-time, I am composing some more data for the forum. You can share the Aberdeen Proving ground data with the forum if you like. Kindest regards, - Patrick Flanagan ---------------------------------------------------------------------------- >> Aberdeen Proving Grounds << These are infrasound weapons. There are supposed to be frequencies that resonate your spine, some others that create headaches, etc. They can hardly be attenuated by obstacle. In short, a sort of neutron bomb. As to the anal sphincter resonance, I remember reading that Tesla had fabricated a vibration platform and invited VIPs for a demo. The mayor had to leave suddenly for a trip to the little corner when Tesla went through this critical frequency in his setups. (Hehehe! re. Broadway play, they must have been careful to choose their words to call it a crappy play!). I remember reading something about an infrasound canon being made of propane burners. I guess the combustion was interrupted to the desired frequency rate like in the pulsoreactors of the V1 (combustion is stop and go due to a shutter closing and opening at the front of the reactor.) >> focused sound waves << Ziolkowski said that he had tested the result of acoustics in water tanks in the lab. So I would say that they are already directional. But it is amazing how extra dimensional variables can be helpful in getting the results. It's probably why Bearden was enthusiastics with hypernumbers for a solution of x^2=0 with x different of zero. This sounds quite compatible with the scalar approach of cancelling fields. >> Minto papers << The proof that they are not EM waves would be very handy. As to how to generate them, your story of specially designed horn could point to a way to do it. But it would be unsuitable in the non-microwave region. Do you remember what range of frequencies Minto was using? >> more data for the forum << Thank you very much. We are all awaiting your next brief! If you are short of ideas, I can prepare more questions from your write ups. Best regards, - Alain Beaulieu ---------------------------------------------------------------------------- His reply of 20 Aug 03:20: Dear Alain, Page 10 Minto used frequencies in the audio range to about 50 KHz. He told me that he could not generate his "hydronic" signals in the RF range. I experimented first with the audio and ultrasonic range (these are not acoustic waves but are electrically generated). I then found out the secret of the antenna that I mentioned earlier, i.e. to make sure and do the opposite of calculations for EM antennas. For example, EM antennas are calculated for resonances but the hydronic antenna is out of resonance. The tank circuits can be resonant but the antenna is not. The hydronic or scalar signal amplitude is not dependent on power it is dependent on voltage. The higher the voltage on the antenna, the more powerful is the signal. J. Willard Gibbs published a mathematical treatise on a "non Maxwellian" signal. See: "The Scientific Papers of J. Willard Gibbs", Vol II, Chapter XVIII; Peter Smith. (Non Maxwellian transmission of energy. Now known as a scalar field). The Minto hydronics signal is an exact physical interpretation of the Gibbs paper. It is amazing that no one apparantly took Gibbs seriously. The experiment described by Gibbs works! If you cannot find it, I have the book somewhere in my library and can probably find it and copy it for you. I have been busy with business for the past few days. I have to work at least once a week! We have installed computer language scanner and translation programs on our computer and can now translate Russian, German, French, Spanish and Italian. Chinese and Japanese are on the way. I have been working on some data for the forum and will send it soon. Regards, - Patrick ---------------------------------------------------------------------------- 21-Aug-93 - - Fm: Patrick Flanagan 71650,60 - To: Alain Beaulieu 70403,3645 Flanagan 1993 Patrick Flanagan Permission is given to duplicate this information as long as the author's name and copyright notice are intact. 1993-August-21 02:36am TO: Alain Beaulieu FM: Patrick Flanagan Subj: Hydronic Radiation (Scalar Transmission Through Air and Water) In the 1960's, Wallace Minto, a Florida inventor developed an underwater communications technology based on what he called Hydronic and Plasmonic Waves. Using 100 mw transistor transmitters, he was able to transmit electronic signals through miles of sea-water. The characteristics of his hydronic signal fits the present day description of scalar waves. These signals were transmitted instantaneously through water without an delay. The US Naval Research laboratory published data on the velocity of underwater low frequency transmission: Velocity = 1525 * Sqrt Frequency Velocity is in meters per second This means that a 6 KHz EM signal will propagate through water at a rate of Page 11 118,000 meters per second. Wheras the same EM signal in air would propagate at 300,000,000 meters per second. This means that is we were to transmit one signal through the air, and another through 100 meters of water, we should be able to detect a phase shift between the two signals. The EM signal through water would take about 0.8 milliseconds while the air signal would take .000033 milliseconds. A phase shift would be easy to detect with a dual channel oscilloscope. The air signal was used to trigger the A channel while the B signal came from the scalar receiver. When the test was conducted, no phase shift was detected between the two signals. No test has been conducted at distances great enough to detect if there is a difference in transmission speed in air. Data would tend to indicate that scalar signals may travel faster than EM signals. Scalar signals are non Maxwellian waves and are "tensor" type signals. Also, the scalar signal is transmitted with virtually no attenuation. The attenuation for an EM signal under water is: Attn (db/meter) = 0.03 Sqrt F Therefore, the attenuation for a 6 KHz signal at 100 meters would be 250 db. The receiver had a sensitivity of 10^-9 watts. Therefore, in order to receive the signal, an EM transmitter would have to have a power of 10^16 watts, or more than 10,000 times the power generating capacity of the entire world. We were able to transmit signals at 6 KHz and higher into the 100 KHz range over distances of several miles. These feats are naturally impossible by means of EM signals. You can tell from the formulas, the reason the US Government is using very low frequency signals in its efforts at transmitting signals through the eareth's mantle to nuclear submarines. A 30 Hz EM signal would attenuate 0.16 db per meter. The propagation velocity would be 8 Kilometers per second. With scalar waves, you can achieve unlimited distances and you can communicate in both directions! Antennae: Scalar antennae behave exactly opposite to EM antennae. For example, the dipole antenna: A dipole antenna receives and transmits maximally broadside to the antenna. A scalar signal is received and transmitted maximally in the coaxial direction, that is where the EM signal is at a null - off the ends of the antenna. An EM dipole is resonant at 1/2 wavelength for maximum EM signal while the dipole nust not be at resonance for scalar transmission. We are going to use audio frequencies and very short dipoles. Make two dipoles out of PVC tubing. The tubing should be about six feet long. Attach metal plates at the end of each tube. These can be about one foot square. Drive the antenna with coaxial cable in the middle. Run a wire from the center of each PVC tub out to the metal plates. Run the wire in the middle of the tubes. Detectors: Scalar detection occurs in a non-linear transistor amplifier. The base emitter junction of a transistor if properly biased will act as a great scalar detector. The best transistors for scalar detection are surface- barrier transistors although other transistor circuits can be made to perform Page 12 quite will. When we are using scalar signals in the audio range, an ordinary audio amplifier can be modified to detect scalar signals. Minto connected his dipole leads directly to the base and emitter of the first input transistor of an audio amplifier. Transmitter: The transmitter can be a simple modulated audio oscillator. The output voltage should be as high as possible. (in air, this is no problem) You can use a power audio amplifier as a transmitter and drive it with a pure audio tone to run your tests. Connect the speaker output of the amplifier to a vacuum tube audio output transformer. Get one that has an impedence ratio of 4 ohms to 16,000 ohm sor higher. Connect the output transformer so that the 4 ohm coil is connected to the speaker output terminal. The high voltage side of the transofrmer will connect to the transmitting dipole. The output signal is a funtion of voltage and not current. The higher the voltage, the stronger the scalar signal. In a EM dipole transmitter, the energy is transferred in the form of current. The scalar system is just the opposite. The setup I am describing is for air to air transmission. The water and earth system require different parameters. This is just to get you started. After for successfully detect the signal, you can experiment with different input circuits to maximize detection. Most commercial audio amplifiers have sufficient non-linearity to detect the scalar signal from the transmitter. Meter: You can measure field strenght at the receiver by connecting a Digital Meter accross the output of the amplifier. You will also want to connect a speaker or headphones to the oputput so you can monitor the signal acosutically. If you take your receiver down to the ocean and aim the dipole at the water like a rifle, you will be able to detect signals from fish if you use an audio amplifier as a receiver. Use headphones. Well, that's it for now. The experiments I have described are in introduction into scalar communications. We have developed this system so that it is very sophisticated and can generate and receive these siognals in virtually any frequency range. Let me know how you make out. Kindest regards, - Patrick Flanagan ---------------------------------------------------------------------------- 21-Aug-93 - Fm: Alain Beaulieu/SL9 70403,3645 - To: Patrick Flanagan 71650,60 >> The best transistors for scalar detection are surface- barrier >> transistors although other transistor circuits can be made to perform >> quite will. << Thanks for the hints! About the surface barrier transistors, I just watched a 4 hour videotape on the Montauk project also known as the Philadelphia Experiment revisited. At the end, Preston Nichols goes into a "mathematical frenzy" to explain how the USS Eldridge was made to disappear. He explained that the universe was really a torus. The rate of time is the motion of the 3-D world along the torus but the time itself is a twistor around it which results into a helicoidal path around the ring of the torus. In short, we live in a 5-D world of which 3 dimensions are Page 13 space and 2 dimensions are time. If you can get phased out of the twistor time, you can be made to disappear. He explained that you needed SBT transistors for that and that the US Navy was preventing the public of having access to those. It would appear that it is what makes the Stealth fighters real stealthy (i.e. one step further than Electronic Warfare). Now, in the video, he says that he found a batch of 40,000 of them that were sold by Radio Shack and bought them all because they are not made anymore. So my question to you is: Do you know of part nos for SBT that are available commercially, and if not available, what olther alternatives are there? In spite of VERY wild claims in it, the Montauk story has a ring of truth to it so I would certainly enjoy it if you could vision it and provide us with your comments. The tape is #610217 and is titled "Conference Workshop: Delta t Generator & the Philadelphia Experiment" by Al Bielek. It sells for $39.95 from The International Tesla Society. It starts by the story of Tesla (first 1.5 hour) and then goes into the philadelphia experiment background (Einstein, Von Neumann, Tesla, etc, and the Advanced Study Institute in Princeton). They also have the book "The Montauk Project: Experiment in Time" by Preston B. Nichols, 1992, Sky Books, Westbury, New York, ISBN 0-9631889-0-9. You can reach them at 1-800-397-0137, or (719) 475-0918, FAX: (719) 475-0582. The tape was from a workshop they had during their last Extraordinary Science on 22-25 July 1993 in Colorado Springs. Regards, Alain ---------------------------------------------------------------------------- 22-Aug-93 - Fm: Alain Beaulieu/SL9 70403,3645 - To: Christopher T. Malcheski >> What's a good book to read to get a very basic introduction to what >> scalar waves are and how they work? << That's the problem: there is no one good book. But the best one I've seen is Bearden's book titles: "AIDS: Biological Warfare". I think it was chapter 4 which was subtitled Extraordinary Physics. Bearden keeps it mysterious because of non-disclosure agreements that he had to sign with some researchers but it is a very good start. Alain ---------------------------------------------------------------------------- If you have comments or other information relating to such topics as this paper covers, please upload to KeelyNet or send to the Vangard Sciences address as listed on the first page. Thank you for your consideration, interest and support. Jerry W. Decker.........Ron Barker...........Chuck Henderson Vangard Sciences/KeelyNet ---------------------------------------------------------------------------- If we can be of service, you may contact Jerry at (214) 324-8741 or Ron at (214) 242-9346 ---------------------------------------------------------------------------- Page 14